Raiding a base is always challenging, but after a successful raid, looking at all the items you have looted, it does feel immensely satisfying. In Rob Run, you can raid players’ bases, but you need to keep so many things in mind before moving forward, especially when solo. Raiding bases requires lengthy preparation and proper tools in hand before carrying out the actual raid. There are too many ways to mess up a raid easily, especially if you have no idea what you are doing.
In this guide, I will show you how to raid a base in Rob Run solo and the tools required for the job. Here I will also bring up an alternative method to raid a base that will be less reliant on many of the critical tools required for the raid.
All the Ways to Raid a Player Base in Rob Run

The raiding part of the entire gameplay will take a few minutes; the actual length of the raid lies in the preparation. You should never go to the raid without the right tools, or you will have a rough time, especially on solo. Here is all the stuff I’m going to cover for the player base raid in Rob Run:
- Get Decoders
- Fusing System
- Creating a Plan
- Alternative Method for Raiding
Get Decoders
The main hurdle of any base is the security system. Players who just started playing the game will have fewer defenses on their base compared to players who are farming all the time. The only way to bypass the security system of any player’s base is by using Decoders. I will advise you to get at least 40 to 50 decoders before raiding a base.
Here are the ways to get Decoders:
- Using Epic or Legendary keys to find rooms where you have a chance to find decoders.
- Fill an Epic Action Camera and exchange it for a decoder. I have to mention that exchanging an Epic Action Camera (Completed) is a gamble, as these will go for 100k in the game. Here, you are making a decision whether to go for money or decoders.
Enter Lenny’s Motel and look for the hidden doors to make the Epic Action Camera exchange for decoders. You will also need a minidrill for the raid; have it before going on a base raid. You can obtain the minidrill through the barter system at Lenny’s Motel.
Fusing System

The fuse system has rarity mechanics; each rarity will offer a different number of protection points to the base. In short, use the fuses to analyze the quality and difficulty of the base you want to raid. Green Electric Fuses offer one protection point, Epic leads to 3 protection points, and lastly, Legendary leads to 5.
If the base has legendary fuses, then raiding will be more challenging; hence, you will need more decoders to break in. More electric fuses on a base sends the message of more security measures, which means more decoders. As you can guess, the importance of these decoders and how helpful they are in dealing with the critical part of the raid.
Creating a Plan

If the player is new to the game, then their base will have less security, which means fewer required decoders for the raid. While raiding a small player will be easy and the entire operation will be smoother, the rewards will be lackluster and decent. Here is how the raid will work out in Rob Run:
- #1| Approach the gate to bypass its security and finally head inside.
- #2| Once inside, start moving to the Laboratory and Grow House to break in.
- #3| After you loot everything, it’s time to pack up the bag and leave.
Tip: I recommend skipping Lv. 1 areas; jump into Lv. 2 settlements for better rewards and deal with decent security. Don’t break into any property that catches your eye; sometimes you will leave with nothing valuable after raiding.
Alternative Method for Raiding
Some players have discovered that using the ramp-like patches of land around the base can be used for vehicle traversal over the fence of the base. In short, use the ramp-like patch of land around the base to drive your vehicle over the base’s fence or gate. You don’t have to use decoders to bypass the gate’s security anymore, since we are just skipping past it by jumping over it. To pull this move, you will need to drive your car over a ramp, which is pretty common around the base areas. Once you find one, just drive your car on the ramp to land inside the base.
Once you are inside the base and have looted everything from the base. It’s time to pack up and leave. Easier said than done, since we didn’t break into the base the “legal” way, we must use a different technique to get out of the base. Here, you just need to park your vehicle near the fence around the base, and then make your character jump on the vehicle and then perform another jump to get over the wall to land on the other side. That’s it; you just raided a base without using too many decoders.
Tips for Raiding
- When you are raiding, make sure the area is empty of any players, or you will get unwanted attention.
- Another rule is to never hit a base in your own neighbourhood, or you will have to deal with more problems.
- If you’ve never raided before, then I recommend trying out a couple of Lv.1 settlements for raids to get used to certain mechanics. Only then, move forward with Lv.2 or higher for better rewards for your trouble.
- Always carry decoders before you think about raiding the base.
- Make sure the base you are about to raid is not occupied, or you will have major problems.
- If the base still has a basic trailer, then it’s in early phases, so it’s better to skip and save the decoders for better candidates. Do note, even if some bases might carry a basic appearance, they will have extensive security.




